irdpt-140502292014050229200225CMV Verlagkhoffmann@cmv-verlag.comCMV VerlagIran Polymer Technology, Research and Developmentirdpt2538-3345621201722-rezapoorghasemi621201751410.66224/irdpt.27454.2.2.5http://irdpt.ir/fa/Article/27454- http://irdpt.ir/fa/Article/Download/27454
- http://irdpt.ir/fa/Article/Download/27454
- http://irdpt.ir/fa/Article/Download/27454
- http://irdpt.ir/fa/Article/Download/27454
- http://irdpt.ir/fa/Article/Download/27454
- http://irdpt.ir/fa/Article/Download/27454
- http://irdpt.ir/fa/Article/Download/27454
1. Nield S. A., Budman H. M., and Tzoganakis C., “Control of a LDPE Reactive Extrusion Process,” Control Eng. Pract., 8, 911–920, 2000.
2. White J. L., Choi D., and Choi C.-H., “Crystallization and Structure Development in Polyolefin Processing.,” Arab. J. Sci. Eng., 27, 69–97, 2002.
3. Santamaria A. and White J. L., “Rheological Properties, Shrinkage and Melt Spinning Instability of Blends of Linear Polyolefins with Low Density Polyethylene,” J. Appl. Polym. Sci., 31, 209–224, 1986.
4. Channell A. D. and Clutton E. Q., “The Effects of Short Chain Branching and Molecular Weight on the Impact Fracture Toughness of Polyethylene,” Polymer, 33, 4108–4112, 1992.
5. Jorgensen J. K., Stori A., Redford K., and Ommundsen E., “Introduction of Long-chain Branches in Linear Polyethylene by Light Cross-linking with 1, 3-benzenedisulfonyl azide,” Polymer, 46, 12256–12266, 2005.
6. Chae H. G., Kim B. C., Im S. S., and Han Y. K., “Effect of Molecular Weight and Branch Structure on the Crystallization and Rheological Properties of Poly (butylene adipate),” Polym. Eng. Sci., 41, 1133–1139, 2001.
7. Gao C. and Yan D., “Hyperbranched Polymers: from Synthesis to Applications,” Prog. Polym. Sci., 29, 183–275, 2004.
8. Hadjichristidis N., Xenidou M., Iatrou H., Pitsikalis M., Poulos Y., Avgeropoulos A., Sioula S., Paraskeva S., Velis G., and Lohse D. J., “Well-defined, Model Long Chain Branched Polyethylene. 1. Synthesis and Characterization,” Macromolecules, 33, 2424–2436, 2000.
9. Gahleitner M., “Melt Rheology of Polyolefins,” Prog. Polym. Sci., 26, 895–944, 2001.
10. Vega J., Aguilar M., Peón J., Pastor D., and Martínez-Salazar J., “Effect of Long Chain Branching on Linear-Viscoelastic Melt Properties of Polyolefins,” e-Polymers, 2, 624–658, 2002.
11. Zatloukal M., “Measurements and Modeling of Temperature-Strain Rate Dependent Uniaxial and Planar Extensional Viscosities for Branched LDPE Polymer Melt,” Polymer,104, 258–267, 2016.
12. Passaglia E., Coiai S., and Augier S., “Control of Macromolecular Architecture During the Reactive Functionalization in the Melt of Olefin Polymers,” Prog. Polym. Sci., 34, 911–947, 2009.
13. Manley T. R. and Qayyum M. M., “The Effects of Varying Peroxide Concentration in Crosslinked Linear Polyethylene,” Polymer., 12, 176–188, 1971.
14. Zhang X., Yang H., Song Y., and Zheng Q., “Rheological Behaviors of Randomly Crosslinked Low Density Polyethylene and its Gel Network,” Polymer, 53, 3035–3042, 2012.
15. Curro J. G., Pearson D. S., and Helfand E., “Viscoelasticity of Randomly Crosslinked Polymer Networks. Relaxation of Dangling Chains,” Macromolecules, 18, 1157–1162, 1985.
16. Gustafsson B., Boström J., and Dammert R. C., “Stabilization of Peroxide Crosslinked Polyethylene,” Macromol. Mater. Eng., 261, 93–99, 1998.
17. Romani F., Corrieri R., Braga V., and Ciardelli F., “Monitoring the Chemical Crosslinking of Propylene Polymers Through Rheology,” Polymer, 43, 1115–1131, 2002.
18. Tai H., “Molecular Structural Evolution in Crosslinking Low Density Polyethylene–Trimethylolpropane Trimethacrylate Systems,” Polym. Eng. Sci., 41, 95–106, 2001.
19. Russell K. E., “Free Radical Graft Polymerization and Copolymerization at Higher Temperatures,” Prog. Polym. Sci., 27, 1007–1038, 2002.
20. Raval H., Singh Y. P., Mehta M. H., and Devi S., “Grafting of Low Density Poly (ethylene) with Butyl Acrylate: Synthesis and Characterisation,” Polym. Int., 24, 99–104, 1991.
21. Chew W. S., “Investigation of TMPTMA Added ABS, LDPE, HDPE and EVA with Electron Beam.” PhD thesis, UTAR, 2015.
22. Ali Z. I., Youssef H. A., Said H. M., and Saleh H. H., “Influence of Electron Beam Irradiation and Polyfunctional Monomer Loading on the Physico‐Chemical Properties of Polyethylene/Polypropylene Blends,” Adv. Polym. Technol., 25, 208–217, 2006.
23. Cicogna F., Coiai S., Moliterni D., Ruggeri G., Coltelli M., Lazzeri A., and Passaglia E., “Co‐agent Mediated Functionalization of LDPE/iPP Mixtures for Compatibilization of WEEE‐Recovered Polyvinylchloride,” Polym. Int., 65, 621–630, 2016. -AbbasKebritchi6212017152610.66224/irdpt.27455.2.2.15http://irdpt.ir/fa/Article/27455- http://irdpt.ir/fa/Article/Download/27455
- http://irdpt.ir/fa/Article/Download/27455
- http://irdpt.ir/fa/Article/Download/27455
- http://irdpt.ir/fa/Article/Download/27455
- http://irdpt.ir/fa/Article/Download/27455
- http://irdpt.ir/fa/Article/Download/27455
- http://irdpt.ir/fa/Article/Download/27455
1. Sankar R.M., Roy T.K. and Jana T., “Functionalization of Terminal Carbon Atoms of Hydroxyl Terminated Polybutadiene by Polyazido Nitrogen Rich Molecules”, Bulletin of Materials Science, 34, 745-754,2011.
2. Zhou Y., Long, X.P. and Zeng Q.X. “Simulation Studies of the Interfaces of Incompatible Glycidyl Azide P-olymer/hydroxyl‐terminated Polybutadiene Blends by Dissipative Particle Dynamics. I. The Effect of Block Copolymers and Plasticizers”, Journal of Applied Polymer Science, 125, 1530-1537, 2012.
3. Cappello M., Lamia, P., Mura C., Polacco G. and Filippi S., “Azidated Ether-Butadiene-Ether Block Copolymers as Binders for Solid Propellants”, Journal of Energetic Materials, 34,318-341,2016.
4. Toosi F., Shaghayeghi, Mansour Shahidzadeh M, and Ramezanzadeh B., “An Investigation of the Effects of Pre-polymer Functionality on the Curing Behavior and Mechanical Properties of HTPB-based Polyurethane ” Journal of Industrial and Engineering Chemistry,24,166-173, 2015.
5.Agrawal J.P. and Hodgson R., Organic Chemistry of Explosives, John Wiley & Sons, 2007.
6. Provatas, A., “Formulation and Performance Studies of Polymer Bonded Explosives (PBX) Containing Energetic Binder Systems. Part 1 (No. DSTO-TR-1397)”. Defence Science and Technology Organisation Edinburgh (Australla) Weapons Systems Div, 2003.
7. Colclough M.E. and Paul N.C., “Nitrated Hydroxy-terminated Polybutadiene: Synthesis and Properties” In ACS Symposium Series, Washington, DC: American Chemical Society, 623, 97-103, 1974.
8. Millar R.W., Colclough M.E., Golding P., Honey P.J., Paul N.C., Sanderson A.J., Stewart M.J., Volk F. and Thomson B.J., “New Synthesis Routes for Energetic Materials Using Dinitrogen Pentoxide [and discussion] ”, Philosophical Transactions of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 339,305-319, 1992.
9. Mura Claudi., Fruci F., Lamia P., Cappello M., “Synthesis of GAP and PAMMO Homopolymers from Mesylate Polymeric Precursors”, Journal of Energetic Materials, 34, 216-233, 2016.
10. Ang H.G., and Pisharath S., Energetic Polymers. John Wiley & Sons, 2012.
11. Pant C.S., Mada S.S., Mehilal Banerjee S., and Khanna P.K., “Synthesis of Azide-Functionalized Hydroxyl-Terminated Polybutadiene”, Journal of Energetic Materials, 34, 440-449, 2016.
12. Agrawal J.P., High Energy Materials: Propellants, Explosives and Pyrotechnics. John Wiley & Sons, 2010.
13. Wang Q., Wang L., Zhang X. and Mi Z., “Thermal Stability and Kinetic of Decomposition of Nitrated HTPB”, Journal of hazardous materials, 172, 1659-1664, 2009.
14. Abdullah M., Gholamian F. and Zarei A.R. “Investigation of Composite Solid Propellants Based on Nitrated Hydroxyl-Terminated Polybutadiene Binder”, Journal of Propulsion and Power, 30,.862-864, 2014.
15. Florczak B., Bogusz R., Skupiński W., Chmielarek, M. and Dzik, A., “Study of the Effect of Nitrated Hydroxyl-terminated Polybutadiene (NITRATED-HTPB) on the Properties of Heterogeneous Rocket Propellants”, Central European Journal of Energetic Materials, 12, 2015.
16. Shekhar Pant C., Santosh M.S., Banerjee S. and Khanna P.K., “Single Step Synthesis of Nitro-Functionalized Hydroxyl-Terminated Polybutadiene. Propellants, Explosives”, Pyrotechnics, 38, 748-753, 2013.
17. Abusaidi H., Ghaieni H.R., Pourmortazavi S.M. and Motamed-Shariati S.H., “Effect of Nitro Content on Thermal Stability and Decomposition Kinetics of Nitro-HTPB”, Journal of Thermal Analysis and Calorimetry, 124, 935-941, 2016.
18. قايني حميدرضا، ابوسعيدي هادي و معتمدشريعتي سيدهادي،"بهينه سازي متغیرهاي موثر بر سنتز Nitro-HTPB". مجله علمي-پژوهشي موادپرانرژي، سال دهم، شماره 2، شماره پياپي 26، تابستان 94: ص74-65.
19. Shankar R.M., Roy T.K. and Jana T., “Terminal Functionalized Hydroxyl-terminated Polybutadiene: An Energetic Binder for Propellant”, Journal of applied polymer science, 114, 732-741, 2009.
20. Abdullah M., Gholamian F., and Zarei A. R., “Performance Analysis of Composite Propellant Based on HTPB–DNCB”, Journal of Propulsion and Power, 30. 526-528, 2014. -hengamehonarkar6212017273610.66224/irdpt.27456.2.2.27http://irdpt.ir/fa/Article/27456- http://irdpt.ir/fa/Article/Download/27456
- http://irdpt.ir/fa/Article/Download/27456
- http://irdpt.ir/fa/Article/Download/27456
- http://irdpt.ir/fa/Article/Download/27456
- http://irdpt.ir/fa/Article/Download/27456
- http://irdpt.ir/fa/Article/Download/27456
- http://irdpt.ir/fa/Article/Download/27456
1. Martens C., Alkyd resins, Reinhold, New York, 1961.
2. Hofland A. D., “Alkyd Resins: From Down and Out to Alive and Kicking”, Prog. Org. Coat., 73, 274-282, 2012.
3. Wutticharoenwong K., Dziczkowski J., Soucek M. D., “Tung Based Reactive Diluents for Alkyd Systems: Film Properties”, Prog. Org. Coat., 73, 283-290, 2012.
4. Thanamongkollit N., Miller K. R., Soucek M. D., “Synthesis of UV-curable Tung Oil and UV-Curable Tung Oil Based Alkyd”, Prog. Org. Coat., 73, 425-434, 2012.
5. Wicks Z. W., Jones F. N., Pappas P. S., Wicks D. A., Organic Coating Science and Technology, Wiley, 3rd ed., New York, 2006.
6. Lin K. F., Alkyd Resins. In: Kirk-Othmer Encyclopedia of Chemical Technology, Wiley, 5th ed., New York, 2007.
7. Patton T. C., “Alkyd Resin Technology”, Inter Science Manual, New York, 1962.
8. Sailer R. A., Soucek M. D., “Viscoelastic Properties of Alkyd Ceramers”, J. Appl. Polym. Sci., 73, 2017-2028, 1999.
9. Xia Y., Larock R. C., “Vegetable oil-based Polymeric Materials: Synthesis, Properties, and Applications”, Green Chem., 12, 1893-1909, 2010.
10. Alam M., Akram D., Sharmin E., Zafar F., Ahmad S., “Vegetable Oils Based Eco-friendly Coating Materials: A Review Article”, Arabian J. Chem., 7, 469-479, 2014.
11. Gunstone F. D., “Chemical Reactions of Fatty Acids with Special Reference to Carboxyl Group”, Eur. J. Lipid Sci. Technol., 103, 307-314, 2001.
12. Sharmin E., Zafar F., Akram D., Alam M., Ahmad S., “Recent Advances in Vegetable oils Based Environment Friendly Coatings: A Rreview”, Indust. Crop. Prod., 76, 215-229, 2015.
13. Lligadas G., Ronda J. C., Galia M., Cadiz V., “Renewable Polymeric Materials from Vegetable oils: A Perspective”, Mater. Today, 16, 337-343, 2013.
14. Lligadas G., Ronda J. C., Galia M., Cadiz V., “Plant Oils as Platform Chemicals for Polyurethane Synthesis: Current State-of-the-art”, Biomacromolecules, 11, 2825-2835, 2010.
15. Solomon D. H., “Vinyl and Acrylic Modified Alkyds”, J. Oil Colour Chem. Assoc., 45, 88-94, 1964.
16. Solomon D. H., Wigney P. J., “Vinyl and Acrylic Modified Alkyds: Part V, the Formulation of Roller Coating Enamels for Tinplate”, J., Oil Colour Chem. Assoc., 48, 440-446, 1965.
17. Czub P., “Application of Modified Natural Oils as Reactive Diluents for Epoxy Resins”, Macromol. Symp., 242, 60-64, 2006.
18.Ahmad S., Ashraf S. M., Zafar F., “Development of Linseed Oil Based Polyesteramide Without Organic Solvent at Lower Temperature”, J. Appl. Polym. Sci., 104, 1143-1148, 2007.
19. Gooch J. W., Emulsification and Polymerization of Alkyd Resins, Kluwer Academic/Plenum Publishers, New York, 2002.
20. Holmberg K., High Solids Alkyd Resins, Marcel Dekker, New York, 1987.
21. Ang D. T. C., Gan S. N., “Novel Approach to Convert Non-self Drying Palm Stearin Alkyds Into Environmental Friendly UV Curable Resins”, Prog. Org. Coat., 73, 409-414, 2012.
22. Chittavanich P., Miller K., Soucek M. D., “A Photo-curing Study of a Pigmented UV-curable Aalkyd”, Prog. Org. Coat., 73, 392-400, 2012.
23. Smirnova N. A., “Preparation of Water-dilutable Emulsion Glyptal Drying Oils”, Tr. Vses. Nauch. Issled. Inst., 25, 421-428, 1965.
24. Kraft W. M., Weisfeld J., Stable Aqueous Alkyd Resin Emulsions, US Pat. 3,223,658, 1965.
25. Yaseen M., Sastry G. M., Narasimham P., Aggarwal J. S., “Storage Stability of Alkyd Emulsions. I. size Ferequency Analysis and Distribution of Globules in Unpigmented Alkyd Emulsions”, Indian J. Technol., 2, 227-231, 1964.
26. Bieleman J. H. (Ed.), Additives for Coatings, Wiley, Germany, 2000.
27. Nae H. N., Bank R. H., “Rheological Properties of Associative Thickeners in Water-based Coatings”, Rheology, 1, 170-178, 1991.
28. Beetsma J., “Alkyd Emulsions Paints: Properties, Challenges andS”, Pigment Resin Technol., 27, 12-19, 1998.
29 Patton T. C., Paint and Flow and Pigment Dispersion, Wiley, 2nd ed., New York, 1979.
30. Van D. V., Leo G., Marton B. V., “Drying of Alkyd Emulsion, a Chemical and Mechanical Depth Resolved Look at Oxidative Network Formation”, Julius Fatipec Congress, 27, 899-906, 2004.
31. Haseebuddin S., Parmar R., Waghoo G., Ghosh S. K., “Study of Hexafunctional Polyol in High Solids Air-drying Alkyd: Improved Film Performance”, Prog. Org. Coat., 64, 446-453, 2009.
32. Kong X., Liu G., Qi H., Curtis J. M., “Preparation and Characterization of High-solid Polyurethane Coating Systems Based on Vegetable Oil Derived Polyols”, Prog. Org. Coat., 76, 1151-1160, 2013.
33. Fertier L., Koleilat H., Stemmelen M., Giani O., Joly-Duhamel C., Lapinte V., Robin J. J., “The Use of Renewable Feedstock in UV-curable Materials – A New Age for Polymers and Green Chemistry”, Prog. Polym. Sci., 38, 932-962, 2013.
34. Rengasamy S., Mannari V., “UV-curable PUDs Based on Sustainable Acrylated Polyol: Study of Their Hydrophobic and Oleophobic Properties”, Prog. Org. Coat., 77, 557-567, 2014.
35. Patel K. I., Parmar R. J., Parmar J. S., “Novel Binder System for Ultraviolet-curable Coatings Based on Tobacco Seed (Nicotiana Rustica) Oil Derivatives as a Renewable Resource”, J. Appl. Polym. Sci., 107, 71-81, 2008. -hajarjamshidi6212017375510.66224/irdpt.27457.2.2.37http://irdpt.ir/fa/Article/27457- http://irdpt.ir/fa/Article/Download/27457
- http://irdpt.ir/fa/Article/Download/27457
- http://irdpt.ir/fa/Article/Download/27457
- http://irdpt.ir/fa/Article/Download/27457
- http://irdpt.ir/fa/Article/Download/27457
- http://irdpt.ir/fa/Article/Download/27457
- http://irdpt.ir/fa/Article/Download/27457
1. Wichterle O. and Lim D., “Hydrophilic Gels in Biologic Use,” Nature, 185,117-118, 1960.
2. Nagam S.P., Jyothi A.N., Poojitha J., Aruna S., and Nadendla R.R., “A Comprehensive Review on Hydrogels,” Int. J. Curr. Pharm. Res., 8, 19-23, 2016.
3. Morkhande V.K., Pentewar R.S., Gapat S.V., Sayyad S.R., Amol B.D., Sachin B., and Sandip K., “A Review on Hydrogel,” Indo Am. J. Pharm. Res.,6, 4678-4689, 2016.
4. Ganji F .and Vasheghani-Farahani E., “Hydrogels in Controlled Drug Delivery Systems,” Iran. Polym. J., 18, 63-88, 2009.
5. Zohuriaan-Mehr M.J. and Kabiri K., “Superabsorbent Polymer Materials: A Review,” Iran. Polym. J., 17, 451-477, 2008.
6. Ullah F., Bisyrul M., Othman H., Javed F., Ahmad Z., and Akil H.M., “Classification, Processing and Application of Hydrogels: A Review,” Mater. Sci. Eng., Part C, 57, 414-433, 2015.
7. Laftah W.A., Hashim S., and Ibrahim A.N., “Polymer Hydrogels: A Review,” Polym. Plast. Technol. Eng., 50, 1475-1486, 2011.
8. Mathur A.M., Moorjani S.K., and Scranton A.B., “Methods for Synthesis of Hydrogel Networks: A Review,” J. Macromol. Sci., Part C: Polym. Rev., C36, 405-430, 1996.
9. Ahmad E.M., “Hydrogel: Preparation, Characterization, and Applications: A Review,” J. Adv. Res., 6, 105-121, 2015.
10. Shetye S.P., Godbole A., Bhilegaokar S., and Gajare P., “Hydrogels: Introduction, Preparation, Characterization and Applications,” Human J., 1, 105-121, 2015.
11. Shetye S.P., Godbole A., Bhilegaokar S., and Gajare P., “Hydrogels: Introduction, Preparation, Characterization and Applications,” Int. J. Soc. Res. Methodol. 1, 47-71, 2015.
12. Lipatov Y.S., “Polymer Blends and Interpenetrating Polymer Networks at the Interface with Solids,” Prog. Polym. Sci., 27, 1721-1801, 2002.
13. Hoffman A.S., “Hydrogels for Biomedical Applications,” Adv. Drug Deliv. Rev., 64, 18-23, 2012.
14. Qiu Y. and Park K., “Environment-sensitive Hydrogels for Drug Delivery,” Adv. Drug Rev., 53, 321-339, 2001.
15. Akhtar M.F., Hanif M., and Ranjha N.M., “Methods of Synthesis of Hydrogels: A Review,” Saudi Pharm. J., 24, 554-559, 2016.
16. Hunt J.A., Chen R., van Veen T., and Bryan N., “Hydrogels for Tissue Engineering and Regenerative Medicine,” J. Mater. Chem. B, 2, 5319-5338, 2014.
17. Cappello J., Crissman J., Dorman M., Mikolajczak M., Textor G., Marquet M., and Ferrari F., “Genetic-Engineering of Structural Protein Polymers,” Biotechnol. Prog., 6, 198-202, 1990.
18. Cappello J., Crissman J.W., Crissman M., Ferrari F.A., Textor G., Wallis O., Whitledge J.R., Zhou X., Burman D., Aukerman L., and Stedronsky E.R., “In-situ Self-assembling Protein Polymer Gel Systems for Administration, Delivery, and Release of Drugs,” J. Control. Rel., 53, 105-117, 1998.
19. Omidian H. and Park K., Hydrogels, Fundamentals and Applications of Controlled Release Drug Delivery, Advances in Delivery Science and Technology, Siepmann J. (Ed.), CRS, 2012.
20. Gulrez S.K.H., Al-Assaf S., and O Phillips G., Hydrogels: Methods of Preparation, Characterisation and Applications, www.intechopean.com, 2012.
21. Kuijpers A.J., Engbers G.H.M., Meyvis T.K.L., de Smedt S.S.C., Demeester J., Krijgsveld J., Zaat S.A.J., Dankert J., and Feijen J., “Combined Gelatin-Chondroitin Sulfate Hydrogels for Controlled Release of Cationic Antibacterial Proteins, Macromolecules, 33, 3705-3713, 2000.
22. Sperinde J.J. and Griffith L.G., “Synthesis and Characterization of Enzymatically-Crosslinked- Poly(ethylene glycol) Hydrogels,” Macromolecules, 30, 5255-5264, 1997.
23. Jeong B. and Gutowska A., “Lessons from Nature: Stimuli-responsive Polymers and Their Biomedical Applications,” TRENDS Biotechnol., 20, 305-311, 2002.
24. Darsow U., Vieluf D., and Ring J., “Atopy Patch Test with Different Vehicles and Allergen Concentrations: An Approach to Standardization,” J. Allerg. Clinic. Immunol., 95, 677-684, 1995.
25. Khoee S. and Kardani M., “Hydrogels as Controlled Drug Delivery Carriers,” Polymerization, 2, 16-27, 2013.
26. Calò E. and Khutoryanskiy V.V., “Biomedical Applications of Hydrogels: A Review of Patents and Commercial Products,” Eur. Polym. J., 2014.
27. Chirani N., Yahia L., Gritsch L., Motta F.L., Chirani S., and Faré S., “History and Applications of Hydrogels,” J. Biomed. Sci., 4, 2015.
28. Ghasemzadeh H., and Shidrang S., “Methyl Violet Dye Absorption from Aqueous Solutions by Nanomagnetic Hydrogels Based on κ-Carrageenan and Acrylic Acid,” Iran. J. Polym. Sci. Technol. (Persian), 29, 365-376, 2016.
29. Demitri C., Scalera F., Madaghiele M., Sannino A., and Maffezzoli A., “Potential of Cellulose-Based Superabsorbent, Hydrogels as Water Reservoir in Agriculture,” Int. J. Polym. Sci., 1-6, 2013
30. Parvathy P.C. and Jyothi A., “Rheological and Thermal Properties of Saponified Cassava Starch-g-Poly (acrylamide) Superabsorbent Polymers Varying in Grafting Parameters and Absorbency,” J. Appl. Polym. Sci., 131, 1-11, 2014.
31. Tongwa P., Nygaard R., and Bai B., “Evaluation of a Nanocomposite Hydrogel for Water Shut-Off in Enhanced Oil Recovery Applications: Design, Synthesis, and Characterization,” J. Appl. Polym. Sci., 2012, DOI: 10.1002/APP.38258.
-azamghasemi6212017566610.66224/irdpt.27458.2.2.56http://irdpt.ir/fa/Article/27458- http://irdpt.ir/fa/Article/Download/27458
- http://irdpt.ir/fa/Article/Download/27458
- http://irdpt.ir/fa/Article/Download/27458
- http://irdpt.ir/fa/Article/Download/27458
- http://irdpt.ir/fa/Article/Download/27458
- http://irdpt.ir/fa/Article/Download/27458
- http://irdpt.ir/fa/Article/Download/27458
1. Kabir R. B., Ferdous N., “Kevlar-The Super Tough Fiber,” International Journal of Textile Science, 1,78-83, 2012.
2. Rajabioun R., “Cuckoo Optimization Algorithm,” Applied Soft Computing, 11, 5508–5518, 2011.
3. Kumar S., “Advances in High Performance Fiber,” Indian jornal of fiber & textile reasearch, 16, 52-64, 1991.
4. Lem K. W., Kwon Y. D., Chin H. B., Li H. L., Prevorsek D. C., “Spectra Composite That Withstands Torch Flame Test,” Polymer Engineering & Science, 34,765–778, 1994.
5. Dencheva N.V., Maria J. Oliveira, Antonio S. Pouzada, Mark P. Kearns, Zlatan Z. Denchev, “Mechanical Properties of Polyamide 6 Reinforced Microfibrilar Composites,” Polymer composites, 32, 407–417, 2011.
6. Langdon G.S., Nurick G.N., Lemanski S.L., Simmons M.C., Cantwell W.J., Schleyer G.K., “Failure Characterisation of Blast-Loaded Fibre-Metal Laminate Panels Based on Aluminium and Glass-Fibre Reinforced Polypropylene,” Composites Science and Technology, 67, 1385-1405, 2007.
7. Langdon G.S., Lemanski S.L., Nurick G.N., Simmons M.C., Cantwell W.J., Schleyer G.K., “Behaviour of Fibre-Metal Laminates Subjected to Localised Blast Loading: Part I-Experi-mental Observations,” International Journal of Impact Engineering, 34, 1202-1222, 2007.
8. Nayak N.V., Composite Materials in Aerospace Applications, International Journal of Scientific and Research Publications, 4, 1-10, 2014.
9. Cunniff P.M., Auerbach M.A. Vetter E., “High Performance M5 Fiber for Ballistics/Structural Composites,” The 23rd army science conference, Orlando, FL, USA, Nov 29-Dec 2, 2004.
10. Chocron S., Pintor A., Gálvez F., Roselló C., Cendón D., Sánchez-Gálvez V., “Lightweight Polyethylene Non-Woven Felts for Ballistic Impact Applications: Material Characterization, ” Composites-Part B: engineering, 39, 1240-1246, 2008.
11. Jassal M., Ghosh S., “Aramid Fibers - an Overview,” Indian Journal of Fiber & Textile Research, 27, 290-306, 2002.
12. Bhatnagar A., “Lightweight Ballistic Composites. Military and Law-Enforcement Applications,” CRC Press: Cambridge, Woodhead Publishing in Materials, England, 2006.
13. Singh P., Malik V., Priyawart L., “Analysiss of Composite Materials Used in Bulletproof Tests Using FEM Technique,” International Journal of Scientific & Engineering Research, 4, 1789-1796, 2013.
14. Kumar N., “Bulletproof Vest and Its Improvement–A Review,” International Journal of Scientific Development and Research (IJSDR), 1, 34-39, 2016.
15. كوره¬پزان¬مفتخر مهدیه، يوسفى لیلا، “جليقه¬هاى ضدگلوله”، رشد آموزش شیمی، دوره 24، شماره 4، تابستان 1390.
16. Marissen R., “Design with Ultra Strong Polyethylene Fibers,” Materials Sciences and Applications, 2, 319-330, 2011.
17. Jeong Y. G., Baik D. H., Jang J. W., Min B. G., “Preparation Structure and Properties of Poly (P-Phenylene Benzobisoxazole) Composite Fibers Reinforced with Graphene,” RSC Advances, 22, 279–286, 2015. Ambrósio J. D., Lucas A., Otaguro H., Costa L., “Preparation and Characterization of Poly (Vinyl Butyral)-Leather Fiber Composites,” Polymer Composites, 32, 776 - 785, 2011.
18. Shockey D. A., Giovanola J. H., Simons J. W., Erlich D.C., Klopp R.W., Skaggs S.R., “Advanced Armor Technology: Application Potential for Engine Fragment Barriers for Commercial Aircraft,” U.S. Department of Transportation- Federal Aviation Administration William J. Hughes Technical Center’s, Report No. DOT/FAA/AR-97/53, USA. 1997.
19. Chen C.F., Frederick D., “Contact of Isotropic Square Plates with Rigid Spherical Indentors,” International Journal Solids and Structures, 30, 637-650, 1993.
20. Zaera R., “Ballistic Impacts on Polymer Matrix Composites, Composite Armor, Personal Armor,” Impact Engineering of Composite Structures. CISM International Centre for Mechanical Sciences, Springer, Vienna, Austria, 526, 2011.
21. Cavallaro V. P., “Soft Body Armor: An Overview of Materials, Manufacturing, Testing, and Ballistic Impact Dynamics,” NUWC-NPT Technical Report, USA,12,057, 2011.
22. Silva M.A.G., Cismasiu C., Chiorean C.G., “Numerical Simulation of Ballistic Impact on Composite Laminates,” International Journal of Impact Engineering, 31, 289-306, 2005.
23. Zukas J.A., Nicholas T., Swift H.F., Greszczuk L.B, Curran D.R., “Impact Dynamics,” John Wiley & Sons, Journal of Applied Mechanics, 50, 702, 1982.
24. Navarro C., “Simplified Modelling of the Ballistic Behaviour of Fabrics and Fibre-Reinforced Polymeric Matrix Composites,” Key Engineering Materials, 141-143, 383-402, 1998.
25. Wen H.M., “Predicting the Penetration and Perforation of FRP Laminates Struck Normally by Projectiles With Different Nose Shapes,” Composite Structures, 49, 321-329, 2000.
26. Chocron I.S., Rodríguez J., Sánchez-Gálvez V., “A Simple Analytical Model for Ballistic Impact in Composites,” Journal of Physical IV. Colloque C3, supplement from Journal of Physical III, 7, 821-826, 1997.
27. Bless S.J., Hartman D.R., “Ballistic Penetration of S-2 Glass Laminates,” 21st International SAMPE Technical Conference, Atlantic City, USA, 25-28, 1989.
28. Caprino G., Lopresto V., “On the Penetration Energy for Fibre-Reinforced Plastics Under Low Velocity Impact Conditions,” Composites Science and Technology, 61, 65-73, 2001.
29. Jacobs M.J.N., M.J.N. Van Dingenen M.J.N., “Ballistic Protection Mechanisms in Personal Armour,” Journal Materials Science, 36, 3137-3142, 2001.
-samaheh sadatsajadi6212017677610.66224/irdpt.27459.2.2.67http://irdpt.ir/fa/Article/27459- http://irdpt.ir/fa/Article/Download/27459
- http://irdpt.ir/fa/Article/Download/27459
- http://irdpt.ir/fa/Article/Download/27459
- http://irdpt.ir/fa/Article/Download/27459
- http://irdpt.ir/fa/Article/Download/27459
- http://irdpt.ir/fa/Article/Download/27459
- http://irdpt.ir/fa/Article/Download/27459
1. Hongyuan Y., Kyung H.R., “Characteristic and Synthetic Approach of Molecularly Imprinted Polymer,” Int. J. Mol. Sci, 7, 155–178, 2006.
2. Figueiredo L., Erny G. L., Santos L.., Alves A., “Applications of Molecularly Imprinted Polymers to the Analysis and Removal of Personal Care Products: A Review,” Talanta, 146, 754–765, 2016.
3. Mattiasson B., Ye L., “Molecularly Imprinted Polymers in Biotechnology,” Springer International Publishing Switzerland., 2015.
4. Alvarez-lorenzo Carmen., “ Angel Concheiro., Handbook of Molecularly Imprinted Polymers.,” Smithers Rapra Technology Ltd UK., 2013.
5. Romana S., “Bioapplications for Molecularly Imprinted Polymers,” Anal. Chem., 86, 250–261, 2014.
6. Shen X., Xu C., Ye L., “Molecularly Imprinted Polymers for Clean Water: Analysis and Purification,” Ind. Eng. Chem. Res., 52, 13890–13899, 2012.
7. Nicholls I. A., Karlsson . C. G., Olsson G. D., Rosengren A.M., “Computational Strategies for the Design and Study of Molecularly Imprinted Materials,” Ind. Eng. Chem. Res., 52, 13900–13909, 2013.
8. Whitcombe M. J., Chianella I., Larcombe L., Piletsky S. a., Noble J., Porter R., Horgan A., “The Rational Development of Molecularly Imprinted Polymer-Based Sensors for Protein Detection.,” Chem. Soc. Rev., 40, 1547–1571, 2011.
9. Czulak J. C., Jakubiak-Marcinkowska A., Trochimczuk A., “Polymer Catalysts Imprinted with Metal Ions as Biomimics of Metalloenzymes,” Adv. Mater. Sci. Eng., 2013.
10. Takeuchi T., Hayashi T., Ichikawa S., Kaji A., Masui Mi., Matsumoto H., Sasao R., “Molecularly Imprinted Tailor-Made Functional Polymer Receptors for Highly Sensitive and Selective Separation and Detection of Target Molecules,” Chromatography, 37, 43–64, 2016.
11. Gunter W., “Enzyme-like Catalysis by Molecularly Imprinted Polymers,” Chem. Rev., 102, 1–27, 2002.
12. Dan-Lian H., Rong-Zhong W., Yun-Guo L., Guang-Ming Z., Cui L., Piao X., Bing-An L., Juan-Juan X., Cong W., Chao H., “Application of Molecularly Imprinted Polymers in Wastewater Treatment: A Review,” Environ. Sci. Pollut. Res., 22, 963–977, 2015.
13. Fosca M., Marina R., “Molecularly Imprinted Polymers for Catalysis and Synthesis,” Adv. Biochem. Eng. Biotechnol., 150, 107–129, 2015.
14. Yoshikawa M., Tharpa K., Dima Ş.O., “Molecularly Imprinted Membranes: Past, Present, and Future,” Chem. Rev., 116, 11500-11528, 2016.
15. Reddy S. M, Phan Q. T, El-Sharif H, Govada L, Stevenson D, and Chayen N.E., “Protein Crystallization and Biosensor Applications of Hydrogel-Based Molecularly Imprinted Polymers,” Bio. mac. 13, 3959-3965, 2012.
16. Poma A., Brahmbhatt H., Watts J. K., Turner N.W., “Nucleoside-Tailored Molecularly Imprinted Polymeric Nanoparticles (MIP NPs),” Macromolecules, 47, 6322-6330, 2014.
17. Wackerlig J., Schirhagl R., “Applications of Molecularly Imprinted Polymer Nanoparticles and Their Advances toward Industrial Use: A Review,” Anal. Chem., 88, 250–261, 2016.
18. Cirillo G., Iemma F., Puoci F., Parisi O I., Curcio M., Spizzirri U G., Picci N., “Imprinted Hydrophilic Nanospheres as Drug Delivery Systems for 5-fluorouracil Sustained Release.,” J. Drug Target., 17, 72–7, 2009. -PedramMalaekeh6212017777610.66224/irdpt.27460.2.2.77http://irdpt.ir/fa/Article/27460- http://irdpt.ir/fa/Article/Download/27460
- http://irdpt.ir/fa/Article/Download/27460
- http://irdpt.ir/fa/Article/Download/27460
- http://irdpt.ir/fa/Article/Download/27460
- http://irdpt.ir/fa/Article/Download/27460
- http://irdpt.ir/fa/Article/Download/27460
- http://irdpt.ir/fa/Article/Download/27460
1-Rinker Pipeline Systems, New Orleans, L A , http://www.Rinkerpipelinesystems.com/, available in 30, 2017.
2-Plastics Pipe Institute, Irving TX, https://Plasticpipe.org/drainage/cppa-contact.html/, Available in 30, 2017.
3-Gabriel L.H., The Complete Corrugated Polyethylene Pipe Design Manual and Installation Guide, Plastics Pipe Institute (PPI), USA, 2016.
4-Goddard J.B., A Brief History of the Development and Growth of the Corrugated Polyethylene Pipe Industry in North America, STP1528-EB,USA, 1-15, 2011.
5-Hsuan Y.G., McGrath T., “HDPE Pipe: Recommended Material Specifications and Design Requirements”, NCHRP Report 429, Transportation Research Board, National Research Council, Washington, DC, 1999.
6-Hsuan Y.G., McGrath T., “Protocol long-term Services of Corrugated High Density Polyethylene Pipes”, Florida Department of Transportation, 2005.
7-Husan Y.G., Zhang J.Y., “Wong WK. Evaluate the Long-term Stress Crack Resistance of Corrugated HDPE Pipes”, In: Plastics Pipes XIII Conference, Washington, DC; 2006.
8- Pluimer M., “Establishing 100-year Service Life for Corrugated HDPE Drainage Pipe”, In: ASCE Pipelines Conference, Chicago, IL; 2006.
9- Standard Specification for Polyethylene Plastics Pipe and Fittings Materials, ASTM Standard, D 3350 – 2014.
10- Design Service Life Of Corrugated HDPE Pipe, TR-43/2003, The Plastics Pipe Institute, 1825 Connecticut Ave., NW Suite 680 Washington, DC 20009•P: 202-462-9607•F: 202-462-9779, 2003.
11- Janson, Dr. Lars-Eric, “Plastic Pipes for Water Supply and Sewage Disposal,” Borealis, Sven Axelsson AB/Affish and Reklamtryck AB, Boras, 1996.
12- Janson, Dr. Lars-Eric, “Plastic Pipes – How Long Can They Last?” Report No. 4, Kontrollradet for Plasttror, November, 1996.
13- Gabriel, Dr. Lester H. & Goddard, James B., “Curved Beam Stiffness for Thermoplastic Gravity-Flow Drainage Pipes,” Transportation Research Board, January, 1999.
14- Gabriel, Dr. Lester H. & Goddard, James B., “Relaxation Modulus (from Curved Beam Test and Parallel Plate Test),” Advanced Drainage Systems, Inc., June, 2002.
15- Thermoplastics Pipes and Fittings with Profiled Wall and Smooth Pipe Inside - Part 2: Technical Delivery Specifications, DIN Standard, DIN 16961-2, 2010.
16- Plastics Piping Systems for Non-pressure Underground Drainage and Sewerage - Structured-wall Piping Systems of Unplasticized Poly(vinyl chloride) (PVC-U), Polypropylene (PP) and
polyethylene (PE) - Part 1: Specifications for Pipes, Fittings and the System, EUROPEAN STANDARD, EN 13476-1,2007.
17- همتی محمود و بهزادفر احسان "فرآیندهای شکل دهی پلیمرها"، انتشارات پژوهشگاه صنعت نفت، صفحه 1-356، 1391.
18- Corma INC., Vaughan, http://www.corma.com/, available in 10, February 2017.
19-Fara Tajhiz Ravis, Tehran, http://www.ftrgroup.ir/, available in 10, February 2017.
20-S. Smolders, L. Verhoest, G. De Gueldre, B. Van De Steene, “ Inspection of Deteriorating Asbestos Cement Force Mains with Georadar Technique,” ATV A 127,60, 995-1001,2009.
21- Plastics Piping and Ducting Systems, Thermoplastics Pipes, Determination of Ring Flexibility, BS EN 1446, 1996.
22- Thermoplastics Pipes, Determination of Ring Stiffness, ISO Standards, ISO 9969, 2007.