irdpt-202605191920260519194731CMV Verlagkhoffmann@cmv-verlag.comCMV VerlagIran Polymer Technology, Research and Developmentirdpt2538-33456102025101َAfshinKoohnezhad6102025374310.66224/irdpt.48766.10.1.37http://irdpt.ir/en/Article/48766http://irdpt.ir/en/Article/Download/48766http://irdpt.ir/en/Article/Download/48766http://irdpt.ir/en/Article/Download/48766http://irdpt.ir/en/Article/Download/48766http://irdpt.ir/en/Article/Download/48766http://irdpt.ir/en/Article/Download/48766http://irdpt.ir/en/Article/Download/487661. Ginghtong, Thatchanok, Natthapon Nakpathomkun, and Chiravoot Pechyen. "Effect of injection parameters on mechanical and physical properties of super ultra-thin wall propylene packaging by Taguchi method." Results in Physics 9: 987-995, 2018. 2. A Guide to Polyolefin Injection Molding, LyondellBasell cataloge. 3. Thin Wall Packaging Market Size, Trends and Dynamics, Towards Packaging, June 2024. 4. Thin Wall Packaging Market Size & Share Analysis - Growth Trends & Forecasts (2024 - 2029), Mordor intelligence, 2023. 5. Thin Wall Packaging Market, Market Data Forecast, 2024. 6. آمار معاملات فیزیکی، بورس کالای ایران، ime.coHamidrezaHeydarnejad6102025132610.66224/irdpt.49238.10.1.13http://irdpt.ir/en/Article/49238http://irdpt.ir/en/Article/Download/49238http://irdpt.ir/en/Article/Download/49238http://irdpt.ir/en/Article/Download/49238http://irdpt.ir/en/Article/Download/49238http://irdpt.ir/en/Article/Download/49238http://irdpt.ir/en/Article/Download/49238http://irdpt.ir/en/Article/Download/49238[1] A. Onuki, Phase transition dynamics, Cambridge University Press, 2002. [2] L. Utracki, B. Favis, Polymer alloys and blends, Marcel Dekker: New York, 1989. [3] H. Tanaka, Universality of viscoelastic phase separation in dynamically asymmetric fluid mixtures, Physical review letters 76(5) (1996) 787. [4] K. Yoshimoto, T. Taniguchi, Viscoelastic phase separation model for ternary polymer solutions, The Journal of chemical physics 154(10) (2021). [5] A. Brunk, B. Dünweg, H. Egger, O. Habrich, M. Lukáčová-Medvid'ová, D. Spiller, Analysis of a viscoelastic phase separation model, Journal of Physics: Condensed Matter 33(23) (2021) 234002. [6] S. Ge, S. Samanta, B. Li, G.P. Carden, P.-F. Cao, A.P. Sokolov, Unravelling the mechanism of viscoelasticity in polymers with phase-separated dynamic bonds, ACS nano 16(3) (2022) 4746-4755. [7] A. Surendran, J. Joy, J. Parameswaranpillai, S. Anas, S. Thomas, An overview of viscoelastic phase separation in epoxy based blends, Soft Matter 16(14) (2020) 3363-3377. [8] H. Tanaka, Critical dynamics and phase separation kinetics in dynamically asymmetric binary fluids: New dynamic universality class for polymer mixtures or dynamic crossover?, The Journal of chemical physics 100(7) (1994) 5323-5337. [9] H. Tanaka, Y. Nakanishi, N. Takubo, Nonuniversal nature of dynamic critical anomaly in polymer solutions, Physical Review E 65(2) (2002) 021802. [10] A. Kostko, M. Anisimov, J. Sengers, Dynamic crossover to tricriticality and anomalous slowdown of critical fluctuations by entanglements in polymer solutions, Physical Review E 66(2) (2002) 020803. [11] A. Furukawa, Viscoelastic effect on hydrodynamic relaxation in polymer solutions, Journal of the Physical Society of Japan 72(2) (2003) 209-212. [12] A. Furukawa, Dynamic critical phenomena of polymer solutions, Journal of the Physical Society of Japan 72(6) (2003) 1436-1445. [13] H. Tanaka, T. Araki, Viscoelastic phase separation in soft matter: Numerical-simulation study on its physical mechanism, Chemical engineering science 61(7) (2006) 2108-2141. [14] H. Tanaka, Unusual phase separation in a polymer solution caused by asymmetric molecular dynamics, Physical review letters 71(19) (1993) 3158. [15] H. Tanaka, Viscoelastic model of phase separation, Physical Review E 56(4) (1997) 4451. [16] H. Tanaka, Viscoelastic phase separation, Journal of Physics: Condensed Matter 12(15) (2000) R207. [17] H. Tanaka, Viscoelastic phase separation in soft matter and foods, Faraday discussions 158(1) (2012) 371-406. [18] H. Tanaka, Viscoelastic model of phase separation in colloidal suspensions and emulsions, Physical Review E 59(6) (1999) 6842. [19] H.R. Heydarnezhad, N. Mohammadi, A. Arbe, A. Alegria, How does microstructural design affect the dynamics and rheology of segmented polyurethanes?, Macromolecules 53(13) (2020) 5381-5398. [20] H.R. Heydarnezhad, N. Mohammadi, A. Alegria, Non-Einstein rheology in segmented polyurethane nanocomposites, Macromolecules 54(6) (2021) 2783-2796. [21] J. Jackle, M. Pieroth, Theory of structural evolution in viscoelastic binary liquid mixtures after a temperature jump, Zeitschrift Physik B Condensed Matter 72(1) (1988) 25-39. [22] D. Sappelt, J. Jackle, Spinodal decomposition with formation of a glassy phase, EPL (Europhysics Letters) 37(1) (1997) 13. [23] D. Sappelt, J. Jackle, Computer simulation study of phase separation in a binary mixture with a glass-forming component, Physica A: Statistical Mechanics and its Applications 240(3) (1997) 453-479. [24] D. Sappelt, J. Jackle, Percolation inversion in spinodal decomposition of mixtures with strong kinetic asymmetry, Polymer 39(21) (1998) 5253-5256. [25] P. De Gennes, Dynamics of entangled polymer solutions. I. The Rouse model, Macromolecules 9(4) (1976) 587-593. [26] P. De Gennes, Dynamics of entangled polymer solutions. II. Inclusion of hydrodynamic interactions, Macromolecules 9(4) (1976) 594-598. [27] F. Brochard, P. De Gennes, Dynamical scaling for polymers in theta solvents, Macromolecules 10(5) (1977) 1157-1161. [28] A. Onuki, Elastic effects in the phase transition of polymer solutions under shear flow, Physical review letters 62(21) (1989) 2472. [29] A. Onuki, Phase transitions of fluids in shear flow, Journal of Physics: Condensed Matter 9(29) (1997) 6119. [30] M. Doi, A. Onuki, Dynamic coupling between stress and composition in polymer solutions and blends, Journal de Physique II 2(8) (1992) 1631-1656. MohsenNazarianSattarHasanpoor610202551110.66224/irdpt.49520.10.1.5http://irdpt.ir/en/Article/49520http://irdpt.ir/en/Article/Download/49520http://irdpt.ir/en/Article/Download/49520http://irdpt.ir/en/Article/Download/49520http://irdpt.ir/en/Article/Download/49520http://irdpt.ir/en/Article/Download/49520http://irdpt.ir/en/Article/Download/49520http://irdpt.ir/en/Article/Download/495201. Tran, H., Gurnani, R., Kim, C., Pilania, G., Kwon, H.K., Lively, R.P. and Ramprasad, R., Design of functional and sustainable polymers assisted by artificial intelligence, Nature Reviews Materials, pp.1-21,2024 2. Lase, I.S., Tonini, D., Caro, D., Albizzati, P.F., Cristóbal, J., Roosen, M., Kusenberg, M., Ragaert, K., Van Geem, K.M., Dewulf, J. and De Meester, S., How much can chemical recycling contribute to plastic waste recycling in Europe? An assessment using material flow analysis modeling, Resources, Conservation and Recycling, 192, p.106916, 2023 3. Yakoubi, S., Sustainable Revolution: AI-Driven Enhancements for Composite Polymer Processing and Optimization in Intelligent Food Packaging, Food and Bioprocess Technology, pp.1-26, 2024 4. Badini, S., Regondi, S. and Pugliese, R., Unleashing the power of artificial intelligence in materials design, Materials, 16(17), p.5927, 2023 5. Zarei, A. and Farazin, A., Machine learning insights into the influence of Carbon Nanotube dimensions on Nanocomposite properties: A Comprehensive Exploration, Journal of Computational Applied Mechanics, 55(3), pp.462-472, 2024 6. Estaji, S., Akbari, H., Tayouri, M.I., Miri, F.S., Salahshoori, I., Ruckdaschel, H., Dawi, E.A. and Khonakdar, H.A., Development of microstructure-rheological and electrical properties relationship in PS/POE/HNTs blend nanocomposites using machine learning, Polymer Testing, p.108503, 2024 7. Gaspar-Cunha, A., Covas, J.A. and Sikora, J., Optimization of Polymer Processing: A Review (Part I—Extrusion), Materials, 15(1), p.384, 2022 8. Panesar, A., Carollo, V. and Jamal, M., Simulation-Driven Design and the Role of Optimization in Design for Additive Manufacturing, 2023 9. Edeleva, M., De Smit, K., Debrie, S., Verberckmoes, A., Marien, Y.W. and D'hooge, D.R., Molecular scale-driven upgrading of extrusion technology for sustainable polymer processing and recycling, Current Opinion in Green and Sustainable Chemistry, 43, p.100848, 2023 10. Dananjaya, S.A.V., Chevali, V.S., Dear, J.P., Potluri, P. and Abeykoon, C., 3D printing of biodegradable polymers and their composites–Current state-of-the-art, properties, applications, and machine learning for potential future applications, Progress in Materials Science, p.101336, 2024 11. Sani, A.R., Zolfagharian, A. and Kouzani, A.Z., Artificial intelligence‐augmented additive manufacturing: insights on closed‐loop 3D printing, Advanced Intelligent Systems, 6(10), p.2400102, 2024. 12. Mahmood, M.A., Visan, A.I., Ristoscu, C. and Mihailescu, I.N., Artificial neural network algorithms for 3D printing, Materials, 14(1), p.163, 2020 13. Srivastava, S., Varshney, B., Sharma, V.P. and Ali, B., Applications of Artificial Intelligence in Polymer Manufacturing, Application of Artificial Intelligence in New Materials Discovery, 147, pp.105-122, 2023 14. Jo, C.M., Jang, W.K., Seo, Y.H. and Kim, B.H., In Situ Surface Defect Detection in Polymer Tube Extrusion: AI-Based Real-Time Monitoring Approach, Sensors, 24(6), p.1791, 2024 15. Dananjaya, S.A.V., Chevali, V.S., Dear, J.P., Potluri, P. and Abeykoon, C., 3D printing of biodegradable polymers and their composites–Current state-of-the-art, properties, applications, and machine learning for potential future applications, Progress in Materials Science, p.101336, 2024 16. Lubongo, C., Bin Daej, M.A. and Alexandridis, P., Recent developments in technology for sorting plastic for recycling: The emergence of artificial intelligence and the rise of the robots, Recycling, 9(4), p.59, 2024 17. Lodhi, S.K., Gill, A.Y. and Hussain, H.K., Green innovations: Artificial intelligence and sustainable materials in production, BULLET: Jurnal Multidisiplin Ilmu, 3(4), pp.492-507, 2024 18. Atasi, C., Kern, J. and Ramprasad, R., Design of Recyclable Plastics with Machine Learning and Genetic Algorithm, Journal of Chemical Information and Modeling, 64(24), pp.9249-9259, 2024 19. Atasi, C., J. Kern, and R. Ramprasad, Design of Recyclable Plastics with Machine Learning and Genetic Algorithm. Journal of Chemical Information and Modeling, 2024ShahrzadMehdizadeh FarsangiMehrzadMortezaeeHassanFattahi6102025273610.66224/irdpt.49563.10.1.27http://irdpt.ir/en/Article/49563http://irdpt.ir/en/Article/Download/49563http://irdpt.ir/en/Article/Download/49563http://irdpt.ir/en/Article/Download/49563http://irdpt.ir/en/Article/Download/49563http://irdpt.ir/en/Article/Download/49563http://irdpt.ir/en/Article/Download/49563http://irdpt.ir/en/Article/Download/495631. Zamanian M., Mortezaei M., Salehnia B., & Jam, J. E. Fracture toughness of epoxy polymer modified with nanosilica particles: Particle size effect. Engineering Fracture Mechanics, 97, 193-206. 2013‏.2. Akherati Sany, S. R., Mortezaei, M., & Amiri Amraei, I. Improving Fracture Toughness of Epoxy Nanocomposites by Silica Nanoparticles. Iranian Journal of Polymer Science and Technology, 30(1), 3-17.‏ 2017.3. Kobayashi, T., Ogawa, K., Maeda, R., Wang, P., Kubozono, T., Yoshihara, D., ... & Omiya, M. Quantitative evaluation of crack arrest mechanisms in epoxy/silica nanocomposites. Composites Science and Technology, 261, 111028. 2025.‏4. ابریشمی, سوزان, & مقصود. مروری بر شبکه های پلی‌یورتان–اپوکسی و نانوکامپوزیت آن‌ها. پژوهش و توسعه فناوری پلیمر ایران, 6. 2021.5. Ma, H., Geng, P., Xu, T., Bandaru, A. K., Aravand, A., & Falzon, B. G. Analytical fracture toughness model for multiphase epoxy matrices modified by thermoplastic and carbon nanotube/thermoplastic. Composites Part A: Applied Science and Manufacturing, 177, 107948.‏2024.6. Yang, S., Li, R., Zhu, H., Qin, Y., & Huang, C. Review of the state-of-the-art techniques for enhancing the toughness of thermosetting epoxy asphalt. Construction and Building Materials, 449, 137660.‏ 2024.7. Tangthana-umrung, K., Mahmood, H., Zhang, X., & Gresil, M. Enhancing interlaminar fracture toughness of woven carbon fibre/epoxy composites with engineering thermoplastic and carbon-based nanomaterials. Composite Structures, 282, 115073.‏ 2022. 8. Yao, J., Shi, P., Gao, Y., & Niu, Y. Evolution of phase structure and fracture toughness induced by carbon nanotubes in thermoplastic-toughened epoxy nanocomposites. Journal of Reinforced Plastics and Composites, 44(1-2), 45-55.‏ 2025..9. Mathis, E., Michon, M. L., Billaud, C., Vergelati, C., Clarke, N., Jestin, J., & Long, D. R. Controlling the morphology in epoxy/thermoplastic systems. ACS Applied Polymer Materials, 4(3), 2091-2104.‏ 2022.10. Ma, H., Aravand, M. A., & Falzon, B. G. Influence on fracture toughness arising from controlled morphology of multiphase toughened epoxy resins in the presence of fibre reinforcement. Composites science and technology, 217, 109095.‏ 2022.11. Petrie, E. M. Epoxy adhesive formulations. 2006..12. ‌باریکانی & هنرکار, رزین های اپوکسی, انجمن علوم و مهندسی پلیمر ایران. چ. اول. 22. 2015.13. Mi, X., Liang, N., Xu, H., Wu, J., Jiang, Y., Nie, B., & Zhang, D. Toughness and its mechanisms in epoxy resins. Progress in Materials Science, 130, 100977.‏ 2022.14. Ren, Y., Zhang, L., Xie, G., Li, Z., Chen, H., Gong, H., ... & Luo, J. A review on tribology of polymer composite coatings. Friction, 9, 429-470.‏ 2021.15. Garg, A. C., & Mai, Y. W. Failure mechanisms in toughened epoxy resins—A review. Composites Science and Technology, 31(3), 179-223. 1988.‏16. Kargarzadeh, H., I. Ahmad, and I. Abdullah, Mechanical Properties of Epoxy–Rubber Blends, in Handbook of Epoxy Blends. p. 1-36. 2015.17. Kausar, A.. Performance of corrosion protective epoxy blend-based nanocomposite coatings: a review. Polymer-Plastics Technology and Materials, 59(6), 658-673. 2020.‏18. Brooker, R. D., Kinloch, A. J., & Taylor, A. C.. The morphology and fracture properties of thermoplastic-toughened epoxy polymers. The Journal of Adhesion, 86(7), 726-741. 2010.‏19. Bogetti, T.A. & J.W. Gillespie, Two-Dimensional Cure Simulation of Thick Thermosetting Composites. Journal of Composite Materials,. 25(3). 239-273. 2016.20. Quaresimin, M., Schulte, K., Zappalorto, M., & Chandrasekaran, S.. Toughening mechanisms in polymer nanocomposites: From experiments to modelling. Composites Science and Technology, 123, 187-204.‏ 2016.21. Salunke, A., Sasidharan, S., Cherukattu Gopinathapanicker, J., Kandasubramanian, B., & Anand, A.. Cyanate ester—epoxy blends for structural and functional composites. Industrial & Engineering Chemistry Research, 60(8), 3260-3277.‏ 2021.22. Ma, H., Aravand, M. A., & Falzon, B. G. Phase morphology and mechanical properties of polyetherimide modified epoxy resins: A comparative study. Polymer, 179, 121640.‏ 2019.23. Pena, G., Eceiza, A., Valea, A., Remiro, P., Oyanguren, P., & Mondragon, I. Control of morphologies and mechanical properties of thermoplastic‐modified epoxy matrices by addition of a second thermoplastic. Polymer international, 52(9), 1444-1453.‏ 2003.24. Puglia, D., Al-Maadeed, M. A. S., Kenny, J. M., & Thomas, S. Elastomer/thermoplastic modified epoxy nanocomposites: The hybrid effect of ‘micro’and ‘nano’scale. Materials Science and Engineering: R: Reports, 116, 1-29.‏ 2017.25. Wang, Y. Y., & Chen, S. A.. Polymer compatibility: Nylon‐epoxy resin blends. Polymer Engineering & Science, 20(12), 823-829.‏ 1980.26. Mathis, E., Michon, M. L., Billaud, C., Grau, P., Bocahut, A., Vergelati, C., & Long, D. R. . Thermoset modified with polyethersulfone: characterization and control of the morphology. Journal of Polymer Science, 58(8), 1177-1188.‏ 2020.27. Quan, D., Alderliesten, R., Dransfeld, C., Murphy, N., Ivanković, A., & Benedictus, R. Enhancing the fracture toughness of carbon fibre/epoxy composites by interleaving hybrid meltable/non-meltable thermoplastic veils. Composite Structures, 252, 112699.‏2020.28. Goergen, C., Klingler, A., Grishchuk, S., May, D., Wetzel, B., & Mitschang, P. Novel approach in b-staging of an epoxy resin for development of rCF non-woven prepregs for RTP processing. Key Engineering Materials, 809, 521-526.‏2019.29. Saghafi, H., Palazzetti, R., Zucchelli, A., & Minak, G. Influence of electrospun nanofibers on the interlaminar properties of unidirectional epoxy resin/glass fiber composite laminates. Journal of Reinforced Plastics and Composites, 34(11), 907-914.2015.‏30. Liu, D., Li, G., Li, B., Luan, Y., Ling, H., & Yang, X. In-situ toughened CFRP composites by shear-calender orientation and fiber-bundle filtration of PA microparticles at prepreg interlayer. Composites Part A: Applied Science and Manufacturing, 84, 165-174.‏2016.31. Beylergil, B., Tanoğlu, M., & Aktaş, E. Effect of polyamide-6, 6 (PA 66) nonwoven veils on the mechanical performance of carbon fiber/epoxy composites. Composite Structures, 194, 21-35.‏2018.32. Voleppe, Q., Ballout, W., Van Velthem, P., Bailly, C., & Pardoen, T.Enhanced fracture resistance of thermoset/thermoplastic interfaces through crack trapping in a morphology gradient. Polymer, 218, 123497.2021.33. Jensen, R. E., Palmese, G. R., & McKnight, S. H. Viscoelastic properties of alkoxy silane-epoxy interpenetrating networks. International journal of adhesion and adhesives, 26(1-2), 103-115.‏2006.Mohammad HosseinKaramiOmidMoini Jazani Mohammad AliEtminani Isfahane6102025556710.66224/irdpt.49810.10.1.55http://irdpt.ir/en/Article/49810http://irdpt.ir/en/Article/Download/49810http://irdpt.ir/en/Article/Download/49810http://irdpt.ir/en/Article/Download/49810http://irdpt.ir/en/Article/Download/49810http://irdpt.ir/en/Article/Download/49810http://irdpt.ir/en/Article/Download/49810http://irdpt.ir/en/Article/Download/498101. Jesiya S. G., Vijayan P. P., Vahabi H., Maria H. J., C.S. A., Thomas S., Sustainable Hybrid Green Nanofiller Based on Cellulose Nanofiber for Enhancing the Properties of Epoxy Resin, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 694, 134082, 2024.2. O’Leary M., Hartley R., Radhakrishnan A., Mavrogordato M., McMahon T., Kratz J., Interlaminar Properties of Carbon Fibre/Epoxy Laminates Produced through a Semi-Curing Process, Composites Part A: Applied Science and Manufacturing, 187, 108488, 2024.3. Guadagno L., Naddeo C., Raimondo M., Thermal, Mechanical, and Electrical Performance of Structural Epoxy Resins Filled with Carbon Nanofibers, Journal of Thermal Analysis and Calorimetry, 148, 13095–13106, 2023.4. Mikinka E., Whittaker T., Synaszko P., Whittow W., Zhou G., Dragan K., The Influence of Impact-Induced Damage on Electromagnetic Shielding Behaviour of Carbon Fibre Reinforced Polymer Composites, Composites Part A: Applied Science and Manufacturing, 187, 108464, 2024.5. Yan J., Xu M., Hu X., Liu L., Xiao X., Li B., A Multifunctional Epoxy Composites Based on Cellulose Nanofiber/Carbon Nanotube Aerogels: Simultaneously Enhancing Fire-Safety, Thermal Conductive and Photothermal Performance, Composites Part A: Applied Science and Manufacturing, 187, 108514, 2024.6. Xu Y., Liu S., Xu S., Liu G., Li G., Flexible and Flame Retardant Cotton Fiber-Reinforced CS/CNF/EP Composites For a Sensitive Fire Warning, Chemical Engineering Journal, 500, 156960, 2024.7. Saputri D. D., Saraswati T. E., Raharjo W. W., Anggoro P. A., Reinforcement of Epoxy Resin-Polyimide Composites Using Magnetic-Carbon Nanofiber and Titanium Dioxide as Hybrid Filler for Electromagnetic Interference Shielding Material, Malaysian Journal of Analytical Sciences, 28(5), 1012–1031, 2024.8. Bai G., Niu C., Lang L., Liang X., Gu W., Wei Z., Chen K., Bohinc K., Guo X., In-Situ Formation of Dual-Gradient Hydrogels through Microfluidic Mixing and Co-Extrusion for Constructing an Engineered Antibacterial Platform, Composites Part A: Applied Science and Manufacturing,187, 108497, 2024.9. Klinthoopthamrong N., Thanawan S., Schrodj G., Mougin K., Goh K.-L., Amornsakchai T., Synergistic Toughening of Epoxy Composite with Cellulose Nanofiber and Continuous Pineapple Leaf Fiber as Sustainable Reinforcements, Nanomaterials, 13, 1703, 2023.10. Chaturvedi R., Pappu A., Tyagi P., Patidar R., Khan A., Mishra A., Gupta M.K., Thakur V.K., Next-Generation High-Performance Sustainable Hybrid Composite Materials from Silica-Rich Granite Waste Particulates and Jute Textile Fibres in Epoxy Resin, Industrial Crops and Products, 177, 114527, 2022.11. Parvizi R., Jalilian M., Dearn K. D., Epoxy composites reinforced with nanomaterials and fibres: Manufacturing, properties, and applications, Polymer Testing, 146, 108761, 2025.12. Shokralla E.A., Dielectric Relaxation and Thermal Stability of Epoxy/Polyurethane-Carbon Nanofiber Composites, International Journal of Mathematics and Mathematical Sciences, 6(3), 38-47, 2024.13. Guadagno L., Pantelakis S., Strohmayer A., Raimondo M., High-Performance Properties of an Aerospace Epoxy Resin Loaded with Carbon Nanofibers and Glycidyl Polyhedral Oligomeric Silsesquioxane, Aerospace, 9, 222, 2022.14. Panta J., Rider A.N., Wang J., Yang C.H., Stone R.H., Taylor A.C., Brack N., Cheevers S., Zhang Y.X., High-Performance Carbon Nanofiber Reinforced Epoxy-Based Nanocomposite Adhesive Materials Modified with Novel Functionalization Method and Triblock Copolymer, Composites Part B: Engineering, 249, 110401, 2023.15. Guadagno L., Naddeo C., Raimondo M., Thermal, Mechanical, and Electrical Performance of Structural Epoxy Resins Filled with Carbon Nanofibers, Journal of Thermal Analysis and Calorimetry, 148, 13095–13106, 2023.16. Ran Y., Li Y.D., Zeng J.B., Dynamic Crosslinking Towards Well-Dispersed Cellulose Nanofiber Reinforced Epoxy Vitrimer Composites, Composites Communications, 33, 101228, 2022.17. Çakır M.V., The Synergistic Effect of Hybrid Nano-Silica and GNP Additives on the Flexural Strength and Toughening Mechanisms of Adhesively Bonded Joints, International Journal of Adhesion and Adhesives, 122, 103333, 2023.18. Chu Y.R., Otgonbayar Z., Park G.S., Enhancing the Thermal Conductivity of Epoxy Molding Compounds by Adding SiO2-Embedded Carbon Nanofibers for Semiconductor Packaging Applications, Macromolecular Research, 33, 105–116, 2025.19. Wu H., Yi S., Fan L., Wei S., Mao H., Zhang W., Lin L., Li H., Construction and evaluation of a heterostructured composite with dual functionality for enhancing flame retardancy and thermal insulation efficiency, Materials Today Communications, 45, 112235, 2025.20. Bannov A.G., Golovakhin V., Gudyma T.S., Kurmashov P.B., Influence of Ball Milling on the Electrical Properties of Epoxy Composites Filled with Carbon Nanofibers, Diamond and Related Materials, 152, 111909, 2025.21.Sun W., Gao D., Dianyu E., Synergistic Toughening of Epoxy Resin by Block Ionomers and Carbon Nanofibers, Engineering Fracture Mechanics, 311, 110584, 2024.22.Zhou Y., Zhang Y., Wang J., He Y., Yuan J., Men X., Well-Aligned MXene@MoS2/Carbon Nanofiber Aerogels Reinforced Epoxy Composites with Splendid Thermal and Tribological Performance, Carbon, 213, 118222, 2023.23.Yousef S., Eimontas J., Striūgas N., Thermal Decomposition of CNTs and Graphene-Reinforced Glass Fibers/Epoxy and Their Kinetics, Biomass Conversion and Biorefinery, 14, 869–889, 2024.24. Xu Y., Liu S., Xu S., Liu G., Li G., Flexible and Flame Retardant Cotton Fiber-Reinforced CS/CNF/EP Composites For a Sensitive Fire Warning, Chemical Engineering Journal, 500, 156960, 2024.25. Bannov A.G., Golovakhin V., Gudyma T.S., Kurmashov P.B., Influence of Ball Milling on the Electrical Properties of Epoxy Composites Filled with Carbon Nanofibers, Diamond and Related Materials, 152, 111909, 2025.26.Chu Y.R., Otgonbayar Z., Park G.S., et al., Enhancing the Thermal Conductivity of Epoxy Molding Compounds by Adding SiO2-Embedded Carbon Nanofibers for Semiconductor Packaging Applications, Macromolecular Research, 33, 105–116, 2025.27.Hatano R., Tominaga Y., Imai Y., et al., Preparation Process for Biomass Nanofiber/Bisphenol A-Type Epoxy Resin Composites with Superior Mechanical and Thermal Properties, Cellulose, 2025.28.Watanabe J., Sugane K., Shibata M., Preparation and Properties of Bionanocomposites Based on Aminated Sucrose-Cured Epoxy Resins and Carboxymethyl Cellulose Nanofibers, Journal of Polymers and the Environment, 2025.29.Sun W., Gao D., Dianyu E., Synergistic Toughening of Epoxy Resin by Block Ionomers and Carbon Nanofibers, Engineering Fracture Mechanics, 311, 110584, 2024.30.Yan Y., Ni Q.Q., Carbon Nanofiber-Filled Shape-Memory Epoxy Sponge for Adjustable Microwave Shielding, Materials Chemistry and Physics, 315, 129053, 2024.31.Edvardsen L., Grandcolas M., Lædre S., Yang J., Lange T., Bjørge R., Gaweł K., The Role of Electrical Current Mode in Calcium Carbonate Deposition on Conductive Carbon Nanofiber–Epoxy Coating, Journal of Applied Polymer Science, 2024.32.Parente J.M., Silva A.P., Reis P.N.B., Impact of Cure Temperature and Suspension Viscosity on the Mechanical Properties of Carbon Nanofiber-Reinforced Epoxy Resin Nanocomposites, Procedia Structural Integrity, 61, 2024.33.Hussain A., Keyvani P., Cummings R, Multifunctional Hybrid Composites from Novel Asphaltene-Based Carbon Nanofiber Mats and Woven Carbon Fiber, Journal of Materials Science, 59, 17018–17042, 2024.34.Yu B., Wang W., Zhou G., Song Y., Peng M., Rapid and Scalable Synthesis of Novel Carboxylated Aramid Nanofibers for Simultaneously Improving the Strength and Toughness of Carbon Fiber/Epoxy Laminates, Composites Science and Technology, 245, 110320, 2024.35. Badeli A., Ehsani M., Karimi M., Grafted-IPN epoxy/polyurethane prepolymer; synthesis, morphological, mechanical, and thermal properties investigation of cured networks, Polymer, 325, 128295, 2025.AliKord dezfooliFatemehRafiemanzelat6102025455410.66224/irdpt.49813.10.1.45http://irdpt.ir/en/Article/49813http://irdpt.ir/en/Article/Download/49813http://irdpt.ir/en/Article/Download/49813http://irdpt.ir/en/Article/Download/49813http://irdpt.ir/en/Article/Download/49813http://irdpt.ir/en/Article/Download/49813http://irdpt.ir/en/Article/Download/49813http://irdpt.ir/en/Article/Download/49813 H. Q. Pham and M. J. Marks, "Epoxy resins," Ullmann's Encyclopedia of Industrial Chemistry, 2000. K. Li, N. Huo, X. Liu, J. Cheng, and J. Zhang, "Effects of the furan ring in epoxy resin on the thermomechanical properties of highly cross-linked epoxy networks: A molecular simulation study," RSC advances, vol. 6, no. 1, pp. 769-777, 2016. H. Lee and K. Neville, "Handbook of epoxy resins," 1967. F.-L. Jin, X. Li, and S.-J. Park, "Synthesis and application of epoxy resins: A review," Journal of industrial and engineering chemistry, vol. 29, pp. 1-11, 2015. J. Murphy, Additives for plastics handbook. Elsevier, 2001. T. b. r. company. "Epoxy Resin Global Market Report 2024." https://www.thebusinessresearchcompany.com/report/epoxy-resin-global-market-report, available in 2024. Y. Ma et al., "The adverse health effects of bisphenol A and related toxicity mechanisms," Environmental research, vol. 176, p. 108575, 2019. R. Zielhuis, "Systemic toxicity from exposure to epoxy resins, hardeners, and styrene," Journal of Occupational and Environmental Medicine, vol. 3, no. 1, pp. 25-29, 1961. E. L. Vermeirssen, C. Dietschweiler, I. Werner, and M. Burkhardt, "Corrosion protection products as a source of bisphenol A and toxicity to the aquatic environment," Water research, vol. 123, pp. 586-593, 2017. S. Yu, H. J. Kim, S. Jeon, C. S. Lim, and B. Seo, "Synthesis of polyfunctional amines as curing agents and its effect on mechanical property of epoxy polymers," Journal of Applied Polymer Science, vol. 140, no. 18, p. e53806, 2023. H. Kishi, A. Fujita, H. Miyazaki, S. Matsuda, and A. Murakami, "Synthesis of wood‐based epoxy resins and their mechanical and adhesive properties," Journal of applied polymer science, vol. 102, no. 3, pp. 2285-2292, 2006. J. Łukaszczyk, B. Janicki, and M. Kaczmarek, "Synthesis and properties of isosorbide based epoxy resin," European Polymer Journal, vol. 47, no. 8, pp. 1601-1606, 2011. Z. Tao, S. Yang, Z. Ge, J. Chen, and L. Fan, "Synthesis and properties of novel fluorinated epoxy resins based on 1, 1-bis (4-glycidylesterphenyl)-1-(3′-trifluoromethylphenyl)-2, 2, 2-trifluoroethane," European polymer journal, vol. 43, no. 2, pp. 550-560, 2007. S. Mestry and S. Mhaske, "Synthesis of epoxy resins using phosphorus-based precursors for flame-retardant coating," Journal of Coatings Technology and Research, vol. 16, pp. 807-818, 2019. C.-S. Wang and J.-Y. Shieh, "Synthesis and properties of epoxy resins containing bis (3-hydroxyphenyl) phenyl phosphate," European polymer journal, vol. 36, no. 3, pp. 443-452, 2000. Z. Tao, S. Yang, J. Chen, and L. Fan, "Synthesis and characterization of imide ring and siloxane-containing cycloaliphatic epoxy resins," European Polymer Journal, vol. 43, no. 4, pp. 1470-1479, 2007. M. Kutz, Applied plastics engineering handbook: processing and materials. William Andrew, 2011. L. Klose et al., "Towards sustainable recycling of epoxy-based polymers: approaches and challenges of epoxy biodegradation," Polymers, vol. 15, no. 12, p. 2653, 2023. A. M. Atta, H. A. Al-Hodan, R. S. A. Hameed, and A. O. Ezzat, "Preparation of green cardanol-based epoxy and hardener as primer coatings for petroleum and gas steel in marine environment," Progress in Organic Coatings, vol. 111, pp. 283-293, 2017. A. Anusic, K. Resch‐Fauster, A. R. Mahendran, and G. Wuzella, "Anhydride cured bio‐based epoxy resin: effect of moisture on thermal and mechanical properties," Macromolecular materials and engineering, vol. 304, no. 7, p. 1900031, 2019. S. Zhang, T. Liu, C. Hao, A. Mikkelsen, B. Zhao, and J. Zhang, "Hempseed oil-based covalent adaptable epoxy-amine network and its potential use for room-temperature curable coatings," ACS Sustainable Chemistry & Engineering, vol. 8, no. 39, pp. 14964-14974, 2020. X. Zhao, Z. Zhang, J. Pang, and L. Su, "Study on the preparation of epoxy resin materials from nano-lignin polyols," Industrial Crops and Products, vol. 185, p. 115158, 2022. L. Pezzana et al., "Cationic UV-curing of isosorbide-based epoxy coating reinforced with macadamia nut shell powder," Progress in Organic Coatings, vol. 185, p. 107949, 2023. M. Bergoglio, D. Reisinger, S. Schlögl, T. Griesser, and M. Sangermano, "Sustainable bio-based UV-cured epoxy vitrimer from castor oil," Polymers, vol. 15, no. 4, p. 1024, 2023. L. Pezzana, E. Malmström, M. Johansson, V. Casalegno, and M. Sangermano, "Multiple approaches to exploit ferulic acid bio-based epoxy monomer for green thermoset," Industrial Crops and Products, vol. 212, p. 118304, 2024. C. Elian et al., "Photoactivable alizarin and eugenol-based materials for antibacterial applications," European Polymer Journal, vol. 197, p. 112369, 2023. A. Formia, J.-M. Tulliani, P. Antonaci, and M. Sangermano, "Epoxy monomers consolidant for lime plaster cured via a redox activated cationic polymerization," Journal of cultural heritage, vol. 15, no. 6, pp. 595-601, 2014. J. Crivello and J. Lee, "Redox‐initiated cationic polymerization: The diaryliodonium salt/benzoin redox couple," Journal of Polymer Science: Polymer Chemistry Edition, vol. 21, no. 4, pp. 1097-1110, 1983. H. Negi, A. Kapri, M. Zaidi, A. Satlewal, and R. Goel, "Comparative in-vitro biodegradation studies of epoxy and its silicone blend by selected microbial consortia," International Biodeterioration & Biodegradation, vol. 63, no. 5, pp. 553-558, 2009.